Now that it has booted, there should be the Raspi-config menu present. If it doesn’t, you either have a faulty unit or you need to find instructions on how to operate an electrical socket. Then plug the Micro USB into the power port of the Raspberry Pi and then plug the wall charge into the most conveniently placed power outlet. Plug the Ethernet cable from your router into your Pi. Now you grab your Pi and connect it to a video source using a video RCA cable. MAKE SURE YOU GET THIS CORRECT OR YOU CAN WIPE ALL OF THE DATA OFF OF ANOTHER DRIVE!! Step 5: Set up the Pi This is the letter you want to select under the device tab. Then, using Windows Explorer and the Computer tab, check the letter next to the SD card in side bar. Once the program is open, select the Retropie image you just downloaded as the image file. (Download the RetroPie Project SD card Image) So, now you need to grab your SD card and insert it into your PC’s SD card reader. MAKE SURE YOU GET THIS CORRECT OR YOU CAN WIPE ALL OF THE DATA OFF OF ANOTHER DRIVE!!
Once the program is open, select the Rasbian wheezy you just downloaded as the image file. (Download the Raspbian “Wheezy” under Raw Images.) Then you must download these two programs You should start this by grabbing your SD card and inserting it into your reader.
If you choose this path be prepared for some troubleshooting and sifting through the innards of the Linux OS. Path 2 will separate the men from the boys. The easy way where you will learn nothing about the Linux operating system but it will grant you quick results.
0 kommentar(er)
